okay. i started college as an aerospace engineering major, and decided to change because i didn't want to deal with the math. now, i get a strange enjoyment over working out silly math problems in my head.

man, i'm a dork


i actually mis-remembered Moore's law. the number of transistors that can be squeezed into the same die doubles approximately every 2 years, no every 1.5.

i think this would be the formula:

3600 = (2^x)/2

multiply by 2

7200 = 2^x

and now a logarithm to solve for x

12.81≈x

so, let's give 'em an even 13 to iron things out. of course, Moore's law isn't a law of physics; it's a law of economics, and those laws are subject to change. i think there's more to consider, too. i think a lot of scenes get some post-rendering airbrush work to help smooth out the remaining edges in ways a computer can't (yet). though, that math totally doesn't sound right... hmm counting by hand i get less than 24 years (you have to raise 2 to the power of 12 for it to exceed 3600; 12x2 since it doubles every two years).

i'm not seriously making a prediction that we'll see movie-quality CGI on home computers in 13 or even 24 years. i think, like that magazine rls669 linked, this shows just how fast computers develop.

Industrial Light & Magic (ILM) has the largest renderfarm on the planet, with 1,000 dedicated rendernodes + 3,000 workstations that turn into rendernodes at night, and rendering is 24/7. The industry uses the Pixar Renderman specification for rendering software.

Even hobby level software uses Renderman compliant render engines.

You can do movie quality animation shots on home computers. It just depends on your skill and experience with the 3D CG software you have. The more you work at it, the better you get.

The CPU is used for rendering, not the GPU.

My hobby is 3D CG.

The workstation cards are optimized for rendering large numbers of polygons while working in a 3d application, the gaming cards are optimized for heavy texture and shader work. Once you have the scene set up, it's the cpu that renders out the image or animation frames.

In the past the cards were separate lines, now the nvidia and ATI cards are, for the most part, physically identical to their gaming counterparts. So you can convert a GeForce to an equivalent Quadro with a bios flash and different driver. The system will then recognize it as a Quadro. I did this with my Radeon 9800, converting to a 9800-based FireGL, but changed it back after a while because the performance increase in 3dsmax wasn't enough to make up for the loss of gaming performance.

And now the line between cpu and gpu is blurring, because there are renderers available (nvidia's Gelato being the most common) that will use the gpu to render out cgi.



It depends on the renderer and the work being done. In an animation the job will be split up by frames. For single images most renderers can assign different parts of the image to different machines (or cpu cores). mental ray uses bucket rendering and on my quad I'll have four 64x64 buckets being rendered at one time. Cinema 4d uses scanline rendering so it will divide the render into 4 horizontal sections.

Get a 3d application and then do tutorials until you get proficient enough to focus on the results instead of the process. All the major apps have either demos or free "personal learning" editions. The PLE will usually only output low-res, watermarked renders but be fully featured otherwise. You might want to lood at Blender, a free open source 3d app that is continuously evolving. The main problem with Blender is that like many open source apps, it has an interface that was designed by programmers.

complete and utter side note, i kinda like this:

http://www.frozencpu.com/products/833/bad-367/FrozenCPU_Ram_2_The_Max_Case_Badge.html?tl=g43c12s389

but only 'cause i'm an aries.

hehe sweet i don't think i could put that on my computer though. it wouldn't match the look i'm going for (solid black with green lighting and hints of purple).

you know i haven't talked much about my case modding ideas and plans, and i don't know if it's something that interests any of you. but my own plans are rather extensive. i found that badge yesterday while i was browsing for parts for a mod i'm really excited about. i'm going to mod my right side panel (because how many modded right panels have you seen?). i guess i'm excited because i had to actually think through this one myself, and as far as i've found, no one's done anything quite like it. the idea is to create a 'hidden' circuit pattern in my right panel that can be made visible by turning on a lighting switch.

basically, i'll start by cutting out a really big window and cutting a panel of acrylic to match. i'm going to spray paint the one side of the acyrlic black (the inside), and then etch out a circuitry pattern. i might use a custom decal instead of etching (each option has its pros). got the basic idea from this guy:
http://www.hardforum.com/showthread.php?t=1242685

so visually a circuitry pattern basically consists of lines and dots. for the 'dots' in my circuit pattern, i'll dremel in small intentations and hot glue 3mm LEDs into them; the LEDs will be on one of these sequencers:
http://cgi.ebay.com/Led-Chaser-Sequencer-GREEN-12-Detachable-Cable_W0QQitemZ110198971830QQihZ001QQcategoryZ294QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

since i'm planning to use more than 8 LEDs, i'll either have to splice in extras or purchase more than one of those sequencers. if i splice extra LEDs, i need to add resistors, and that means i need to figure out if there will be a problem with using resistors and multiple LEDs with the sequencer, since it uses PWM to achieve dimming effects on the LEDs.

in either regard, next will come the EL wire, 3 strands of 1.3mm thick wire on a sequencer, spiraled together. i'll lay the spiral down along any circuit path on the panel, securing it in places with electrical tape as needed.

once all the lighting is laid down, the inside of the entire thing will be covered with black electrical tape, to reduce light pollusion both inside the case and on the etched surface as well. with the sequencer on the EL wire, i'm hoping the 3 strands will create the apperance of movement on the visible side (data moving along the circuit).

the goal is for the panel to look solid black, more or less, while the lights are off. but flip on a switch, and the side panel jumps to illuminated life.

i'm sure complications will come up when i do finally start this case mod. the sequencer, for example, has a button that'll let you control the sequence pattern (17 patterns and 3 speeds to chose from!). i'd love if i could figure out a way to access that button from the ouside of my case (if i can't figure something out, at least the sequencer will remember its settings after being powered off). the entire thing also needs to be kept "short" enough for me to still put the panel back on the case! (that, and leave room for me to run a few functional cables behind my mobo tray).

don't know if this is the sort of thing that interests any of you guys, but i'm excited about this idea, and i'm also kind of proud that i've been able to find all the pieces i need to implement it. the original idea started when i saw a write up of someone making a custom PCB of a similar pattern, but used to signal HDD activity. now, if i could figure out a way to tie the speed of both sequencers into my HDD indictor line, but still be able to turn it off with a switch, without losing use of my regular indicator light while the mod was switched off--that'd be amazing. i don't think i could do that without logic--i wonder if an undergrad comp sci or electrical engineering major could do it... they'll work for cheap  

in either regard i'll definately be creating a work log when i finally get around to starting my case mods.

enough about case modding, back to actual technology.

the 9600GT his retailers today.

the good news: they're retailing for $180-210.

the not-surprising news: it's an 8800GT with fewer unlocked stream processors and a "9" slapped in front of it.

here's a review: WWW Link

while this doesn't particularly excite me as a new piece of technology, it is kind of exciting because:

1) the 9800 series should follow soon;

2) the 9k series seems to a new technology oriented towards higher resolutions (and i run at 1920x1200);

3) it's cheap. i'm hoping that'll mean the regular 9800s (not the GX2's) won't be too insanely priced.

in general i think owners of a 8800GT, GTS 512, GTX or ultra don't have much to worry about. from what i've read, the G92 chip doesn't add any transistors over the G80s; the only thing they did with the die shrink was make the chip HDCP complaint (which to be sure, is a good thing for many people). but with the exception of the 9800 GX2, i'm guessing we can expect to see the 9800 series to look a lot like the 8800 series, and probably be priced similarly.

very upset!!! my main puter went down!!! Power Supply:(

I have a 550 Watt PS that went today and I`m not sure if it took out the motherboard too!!! so I`m Done for now

I had taken out 1g of ram thinking it was the issue now I`m not sure of that my puter has act,..up sense I put my 7600GS 512MB AGP Video Card in it which I though the 550 watt PS should have handle,... Considering it is not that old !!!

Zyxpsilon you my want to look into that card more before you by one,... my 5600fx 256mb
show all the ship graphics. not sure if the PS was Just going out or the video card and CPU was just to much for it but I though 550 Watts would have been enough !!!

I had lost my XP install on this puter and was trying to reinstall Vista I lost all my MODS to TA and DA

This set back done me in!!! Till I can get either a new PS or a motherboard for my new PC i wanted to build I have no computer
I`ll try to figure out how to get my updates but I lost all those that I did have which I was going to burn to CD today had about 20g had form DL threw TA.
Take Care All see you when I`m back UP!!

Nasty

UPDATE

I`m back up sort of i`m reformatting and saving as much as i can i was trying to be ready for tomorrow just in case we got a update but i`m not going to make it !!!

going for a 600 watt PS if it is still available I think i`m ok on all my mods stuff well know more later !!!!

Nasty I should have burn to cd LOL

Edited

The POwer Supply fail again so I`m down for now

Nasty

Edited again April 15 2008

Will I`m getting some back on taxes I was not expecting to get SO.....
I`ll be back up shortly
looks like 700 Watt PS for replacement !!!

If you keep losing the PSU, then the motherboard is a likely culprit.

Overheating indicates a heavy current draw and/or no longer functioning fan, or, you need to clean the crud out of the PS. Of course, with a new PS, this does not apply.

You have to take the cover off the PS for this.

If you still get an overheat problem, then the mobo may be at fault.

nice board, but it has one major design flaw. it doesn't support an intel proc.

i myself went with the maximus formula se. very strong board and the clocking features totally blew me away.

i can take my e6600 up to 5.5ghz (liquid cooled), stable 24/7. but i generally
don't run it that fast (just when i feel a need to bench). 3.6ghz is the current setting i run.

i'm not too sure if you are into clocking, but the board you are going to get will change that... i hope